TR 980 TTL Speed Light Flash from Triopo
Wireless trigger sensors:Remote sensing CELL 2 mode for off-camera TTL flash sync.
Increase the external power outlet:TR series adds an external power outlet, call back the higher rate to meet your needs.
Support high-speed continuous shooting:1/16 and below the brightness,TR series to support high-speed continuous shooting 12EPS.
High-precision output:from 1/128 to 1/1, 8 stalls to lose, each stall has two fine-tuning compensation.
Overheat protection:built-temperature detection(thermal protection)
Support second-curtain sync:use a slow shutter for making smear subject, the flash will be off the moment the shutter flash spill, this is the rear-curtain sync function.
|Guide number:||54 meters (ISO 100, 105mm)|
|Circuit design:||Insulated Gate Bipolar Transistor (IGBT)|
|Flash mode:||TTL / M / RPT(repeating) / MA(semi-automatic)|
|Zoom range:||18mm, 24mm, 28mm, 35mm, 50mm, 70mm, 85mm, 105mm, 135mm, 180mm|
|Vertical rotation angle:||0 to 90 degrees|
|Horizontal rotation angle:||0 to 3600 degrees|
|Power:||4X AA Batteries(Alkaline or Ni-MH are usable)|
|Flash control:||8 grade high-speed control(1/128-1/1)|
|Recycle time:||approximately 3s (AA alkaline cell used)|
|Lighting time:||100-1500 times (using AA alkaline cell)|
|Wireless triggering distance:||20-30m dindoor, 10-15m out door|
|Additional function:||PC synchronous,sniff mode,overtemperature protection|
|Dimensions:||200 x 75 x 57mm(extended state)|